Front Heater Core

REMOVAL
1. Drain coolant system.
2. Remove left side lower column cover.
3. Remove steering column assembly.

ABS Module:

4. Remove ABS module, bracket and wiring.

Interconnect And Bracket:

5. Remove I/P to body harness interconnect and bracket.

Lower Silencer Boot:

6. Remove lower silencer boot at base of steering shaft.
7. Pinch off heater lines under the hood.

Heater Core Plate And Tubes:

8. Remove heater core cover. Insert a small amount of towels under the heater core tubes. Remove heater core plate and tubes.

Depress Clips:

9. Depress heater core retaining clips.

Accelerator Pedal:

10. Pull up on accelerator pedal and slide heater core past.
11. Depress brake pedal and remove heater core from HVAC housing.

INSTALLATION
For installation, reverse the above procedures. Install screws to retain heater core in housing. Replace heater core tube inlet 0-rings. Tighten heater core tube retaining plate to 2 to 4 N.m (18 to 36 in. lbs.) torque.