Variable Induction Control Valve: Service and Repair

Fig. 85 Manifold Tuning Valve:

REMOVAL
1. Remove engine cover.
2. Disconnect vacuum hose from manifold tuning valve vacuum motor (Fig. 85).

Fig. 86 Retaining Clip:

3. Remove retaining clip from manifold tuning valve arm (Fig. 86).
4. Remove manifold tuning valve mounting screws.
- Remove tuning valve vacuum motor.

INSTALLATION
1. Install tuning valve.
- Tighten mounting screws to 11 Nm (8 ft lb) torque.
2. Install retaining clip.
3. Connect vacuum hose to the manifold tuning valve vacuum motor.