Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1997 >> RAM 2500 Van V6-3.9L VIN X >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair >> Four Wheel Antilock Brake System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Four Wheel Antilock Brake System

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the windshield washer and engine coolant recovery reservoirs.

CAB Harness Connector Locking Handle:




CAB Harness Connector:





3. Disconnect the Controller Antilock Brake (CAB) harness connector by pulling up on the connector release handle.
4. Remove upper and lower mounting bolts.
5. Remove controller from vehicle.

INSTALLATION
1. Install controller into mounting bracket.
2. Install upper and lower mounting bolts.
3. Install harness connector and pull down on locking handle to lock in place.
4. Install the windshield washer and engine coolant recovery reservoirs.
5. Connect the negative battery cable.



pro multis · About Operation CHARM