Instrument Panel Center Support Bracket Replacement
REMOVALWARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Disconnect and isolate the battery negative cable.
2. Pull the carpet back from the front of the floor panel transmission tunnel far enough to access the center support bracket mounting screws.
3. Remove the two screws that secure the bracket to the instrument panel center support.
Instrument Panel Center Support Bracket Remove/Install:
4. Remove the two screws on the left, and one screw on the right that secure the instrument panel center support bracket to the Airbag Control Module (ACM) bracket on the floor panel transmission tunnel.
5. Remove the center support bracket from the instrument panel.
6. Reverse the removal procedures to install. Tighten the mounting screws to 12 N.m (105 in. lbs.).