Keyless Entry Programming Connector: Description and Operation

SYSTEM OPERATION
The system allows locking and unlocking of vehicle door(s) by remote control using a hand held radio frequency transmitter. The ignition switch must be OFF before the panic function can be activated with the transmitter.

The receiver may receive VAC signals from two transmitters. Each transmitter has its own Vehicle Access Code and the code is programmed and stored into receiver memory. If the transmitter is replaced or a second transmitter is added, the codes of both units have to be reprogrammed into the receiver memory. If a receiver module is replaced, both the transmitter codes must be stored in the new receiver memory.

Operation
The transmitter has three buttons for operation. They are LOCK, UNLOCK and PANIC.

The receiver is capable of retaining all Vehicle Access Codes (VAC) even when power is removed.

Each remote keyless entry module (RKE) must have at least one and no more than two transmitters.