Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1999 >> Durango 4WD V6-3.9L VIN X >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair >> Four Wheel Antilock Brake System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Four Wheel Antilock Brake System

NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programmed into the new CAB.

REMOVAL

1. Disconnect battery negative cable.

Harness Connector Locks:





2. Push the harness connector locks to release the locks, then remove the connectors from the CAB.

Pump Motor Connector:





3. Disconnect the pump motor connector.

Controller Mounting Screws:





4. Remove screws attaching CAB to the HCU.
5. Remove the CAB.

INSTALLATION

1. Place the CAB onto the HCU.

NOTE: Insure the CAB seal is in position before installation.

2. Install the mounting screws and tighten to 4 - 4.7 Nm (36 - 42 inch lbs.).
3. Connect the pump motor harness.
4. Connect the harnesses to the CAB and lock the connectors.
5. Connect battery.


pro multis · About Operation CHARM