Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Wheel Antilock Brake System

NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programmed into the new CAB.

REMOVAL

RWAL Controller:





1. Push the CAB harness connector lock to release the lock and remove the connector from the controller.
2. Remove the RWAL valve harness connector from the controller.
3. Remove the controller mounting screws and remove the controller from the mounting bracket.

INSTALLATION
1. Position the controller on the bracket.
2. Install the mounting screws and tighten to 6 Nm (53 inch lbs.).
3. Install the RWAL valve harness connector into the controller.
4. Install the CAB harness connector into the controller and push down on the connector lock.