Knee Diverter

Tighten the four screws that secure the knee blocker to the instrument panel on each side of the steering column opening to 1.9 Nm (17 in. lbs.).

Tighten the two screws that secure the slotted holes of the knee blocker to the steering column support bracket to 28 Nm (250 in. lbs.).

Tighten the two screws that secure the inside hood release handle to the lower edge of the knee blocker to 2.7 Nm (24 in. lbs.).

Tighten the two screws that secure the 16-way data link connector to the lower edge of the knee blocker to 2.7 Nm (24 in. lbs.).

Tighten the two screws that secure the park brake release handle to the lower edge of the knee blocker to 1.9 Nm (17 in. lbs.).