Toe Adjustment

1. Center the steering wheel and lock in place using a steering wheel clamp.

CAUTION: Do not twist front inner tie rod to steering gear rubber boots during front wheel Toe adjustment.






2. Loosen front inner to outer tie rod end jam nuts. Grasp inner tie rods at serrations and rotate inner tie rods of steering gear to set front toe to the preferred toe specification. Refer to Wheel Alignment Specifications for preferred specification.
3. Tighten tie rod jam nuts to 75 Nm (55 ft. lbs.) torque.
4. Adjust steering gear to tie rod boots at the inner tie rod.
5. Remove steering wheel clamp.
6. Remove the alignment equipment.
7. Road test the vehicle to verify the steering wheel is straight and the vehicle does not wander or pull.