Seat Belt - Second Right Row Outboard LWB

SEAT BELT SECOND RIGHT ROW OUTBOARD - LWB REMOVAL

1. Remove second row seat from vehicle. Service and Repair
2. Slide lower anchor cover from over the anchor shoulder-nut.
3. Remove lower anchor shoulder-nut Second Right Row Outboard Seat Belt LWB
4. Remove lower anchor from wheelhouse.
5. Fold upper turning loop extension cover downward to gain access to anchor bolt.
6. Remove bolt attaching turning loop to extension bracket above quarter glass Second Right Row Outboard Seat Belt - LWB
7. Remove turning loop from extension bracket.
8. Remove D-pillar trim panel.
9. Remove quarter trim bolster.
10. Route seat belt webbing and turning loop through access hole in quarter trim.
11. Remove bolt attaching retractor to inner quarter panel Second Right Row Outboard Seat Belt - LWB
12. Remove screw attaching retractor to inner quarter panel.
13. Remove second row seat belt retractor from vehicle.

INSTALLATION
1. Position second row seat belt retractor in vehicle.
2. Install screw attaching retractor to inner quarter panel.
3. Install bolt attaching retractor to inner quarter panel. Tightening specifications for all seat belt bolts is 39 N.m (29 ft. lbs.) torque.
4. Route seat belt webbing and turning loop through access hole in quarter trim.
5. Install quarter trim bolster.
6. Install D-pillar trim panel.
7. Position turning loop to extension bracket.
8. Install bolt affaching turning loop to extension bracket above quarter glass. Tightening specifications for all seat belt bolts is 39 N.m (29 ft. lbs.) torque.
9. Install upper turning loop extension cover.
10. Position lower anchor to wheelhouse.
11. Install lower anchor shoulder-nut. Tightening shoulder nut to 39 N.m (29 ft. lbs.) torque.
12. Install lower anchor cover over the anchor shoulder-nut.
13. Install second row seat to vehicle. Service and Repair