Trunk / Liftgate Weatherstrip: Service and Repair

LIFTGATE OPENING WEATHERSTRIP

REMOVAL

1. Remove liftgate opening upper trim.
2. Remove liftgate opening scuff plate.

Fig. 4:

3. Pull weatherstrip from liftgate opening (Fig. 4).

INSTALLATION

1. Position weatherstrip in liftgate opening and align corners (Fig. 4).
2. Press weatherstrip onto flange and carefully place over quarter panel trim.
3. Connect ends at bottom/center of liftgate opening.
4. Install liftgate opening scuff plate.
5. Install liftgate opening upper trim.
6. Carefully place weatherstrip over trim using a fiber stick.