Head Rest: Service and Repair

HEADREST SLEEVE

REMOVAL

NOTE: When removing the head restraint sleeves and guides, the retaining tabs on the sleeves will be damaged during the removal process. Check the availability of replacement parts before servicing.

1. Remove head restraint.

Fig. 1:

2. Using a trim stick C-4755 or equivalent, pry head restraint sleeves and guides from seat back. (Fig. 1).
3. Separate head restraint sleeves and guides from seat back and discard.

INSTALLATION

1. Position new head restraint sleeves and guides in seat back.
2. Rotate head restraint sleeve until aligned with slot in the guide and press downward to secure. Ensure head restraint sleeve is anchored securely.
3. Install head restraint.