Headlamp: Service and Repair

Headlamp lens fogging is a normal condition and does not require service unless excessive or continual. Moisture will vent from tubes or vents located on the back of the lamp.

REMOVAL
1. Release hood latch and open hood.

Headlamp Housing:

2. Remove jackscrews attaching headlamp to body.
3. Remove headlamp from body.
4. Disconnect wire connector from headlamp and parking, side marker, and turn signal lamps.
5. Remove headlamp housing from vehicle.

INSTALLATION
1. Place headlamp housing in position on vehicle.
2. Connect wire connectors to headlamp, parking, side marker, and turn signal lamps.
3. Place headlamp in position on body.
4. Install screws to attach headlamp to body.
5. Verify headlamp operation and alignment.