Front Door Hinge: Service and Repair
HINGEREMOVAL
NOTE: When removing a door hinge, do not discard shims (if equipped).
1. Using a grease pencil or equivalent, to mark outline of hinge on door and A-pillar for reference.
2. Support door with suitable lifting device.
Fig. 18:
3. Remove bolts attaching hinge to A-pillar (Fig. 18).
Fig. 19:
4. Remove bolts attaching hinge to door (Fig. 19).
INSTALLATION
1. Clean hinge in an appropriate solvent and dry.
2. Color coat hinge to match body color.
3. Position hinge on door and align with reference marks.
4. Install bolts attaching hinge to door (Fig. 19). Tighten bolts to 28 N.m (20 ft. lbs.) torque.
5. Align hinge with reference marks on A-pillar.
6. Install bolts attaching hinge to A-pillar (Fig. 18). Tighten bolts to 28 N.m (20 ft. lbs.) torque.