Pillar Trim

A-PILLAR TRIM

REMOVAL

RIGHT SIDE

Fig. 32:

1. Remove the grab handle plugs and remove the grab handle bolts (Fig. 32).
2. Remove the grab handle and A-pillar trim.

LEFT SIDE

Fig. 33:

1. Using a special tool C-4755 or equivalent, disengage the push-in fasteners and remove the A-pillar trim (Fig. 33).

INSTALLATION

RIGHT SIDE
1. Install the trim panel.
2. Install the grab handle.
3. Install the bolts and tighten to 6 N.m (55 in. lbs.).
4. Install the bolt plugs.

LEFT SIDE
1. Install the trim and snap push-in fasteners into A-pillar.