Rear

REMOVAL AND INSTALLATION
The rear blower motor relay is used only on models with the optional rear heater-A/C unit.
1. Disconnect and isolate the battery negative cable.
2. Remove the cover from the rear heater-A/C unit.

Rear Blower Motor Relay Remove/Install:

3. Unplug the blower motor relay from the inboard relay wire harness connector, which is secured to the rear of the rear heater-A/C unit.
4. Install the blower motor relay by aligning the relay terminals with the cavities in the wire harness connector and pushing the relay firmly into place.
5. Reinstall the cover for the rear heater-A/C unit.
6. Connect the battery negative cable.
7. Test the relay operation.