Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2000 >> RAM 2500 Van V8-5.2L Prop VIN 2 >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Turn Signal Flasher >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turn Signal Flasher: Service and Repair

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS AND SEAT BELTS/AIRBAGS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the end cap from the driver side end of the instrument panel.

Combination Flasher Remove/Install:




3. Remove the combination flasher from the relay and fuse block.

INSTALLATION
1. Position the combination flasher in the proper receptacle in the relay and fuse block.
2. Align the combination flasher terminals with the terminal cavities in the relay and fuse block receptacle.
3. Push in firmly on the combination flasher until the terminals are fully seated in the terminal cavities in the relay and fuse block receptacle.
4. Install the end cap onto the driver side end of the instrument panel.
5. Reconnect the battery negative cable.
pro multis · About Operation CHARM