Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2000 >> RAM 2500 Van V8-5.2L Prop VIN 2 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Idle Speed/Throttle Actuator - Electronic >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Idle Speed/Throttle Actuator - Electronic: Service and Repair

Fig.17 Sensor Electrical Connectors (Typical):




The IAC motor is located on the back of the throttle body.

REMOVAL
1. Remove engine cover.
2. Remove air cleaner assembly.
3. Disconnect electrical connector from IAC motor.

Fig.21 IAC Motor Mounting Bolts (Screws):




4. Remove two mounting bolts (screws).
5. Remove IAC motor from throttle body.

INSTALLATION
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air cleaner assembly.
5. Install engine cover.
pro multis · About Operation CHARM