Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2000 >> Viper GTS V10-8.0L VIN E >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Battery Temperature Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Temperature Sensor: Service and Repair

REMOVAL
1. Make sure ignition switch is in the OFF position and all accessories are OFF.

Battery Hold-Down/Tray:




2. Refer to the Battery for removal of battery to access the battery temperature sensor.
3. Disconnect electrical connector.
4. Remove Battery Temperature Sensor from battery tray.

INSTALLATION
1. Install Battery Temperature Sensor to battery tray.
2. Connect electrical connector
3. Install Battery refer to the battery installation.
pro multis · About Operation CHARM