Keyless Entry Module: Service and Repair

Fig. 5 Entry Module:

REMOVAL
The entry module is located on the driver's side of the center floor tunnel underneath the instrument panel.
1. Disconnect the battery jump start attachment.
2. Remove left lower instrument panel cover.
3. Remove knee blocker.
4. Remove rubber retaining strap.
5. Disconnect the three wire connectors.
6. Remove module from vehicle.

INSTALLATION
1. Place the module into the mounting bracket.
2. Connect the three wire connectors.
3. Install the rubber retaining strap.
4. Install the knee blocker.
5. Install the left lower instrument panel cover.
6. Connect the battery jump start attachment.