Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Wiper Relay Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig.10 Power Distribution Center - Typical:




2. Remove the cover from the Power Distribution Center (PDC).
3. See the fuse and relay layout label affixed to the underside of the PDC cover for front wiper relay identification and location.
4. Remove the front wiper relay by grasping it firmly and pulling it straight out from the receptacle in the PDC.

INSTALLATION
1. See the fuse and relay layout label affixed to the underside of the PDC cover for the proper front wiper relay location.
2. Position the front wiper relay in the proper receptacle in the PDC.
3. Align the front wiper relay terminals with the terminal cavities in the PDC receptacle.
4. Push firmly and evenly on the top of the front wiper relay until the terminals are fully seated in the terminal cavities in the PDC receptacle.
5. Reinstall the cover onto the PDC.