Input Speed Sensor

41TE - Automatic Transmission
SPEED SENSOR - INPUT
REMOVAL
1. Disconnect battery negative cable.
2. Remove air cleaner/throttle body assembly.
3. Disconnect input speed sensor connector.







4. Unscrew and remove input speed sensor (Fig. 296).







5. Inspect speed sensor O-ring (Fig. 297) and replace if necessary.



INSTALLATION
1. Verify O-ring is installed into position.
2. Install and tighten input speed sensor to 27 Nm (20 ft. lbs.).
3. Connect speed sensor connector.
4. Install air cleaner/throttle body assembly.
5. Connect battery negative cable.