Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig.7 Intelligent Power Module:




2. Unlatch and remove the cover from the Intelligent Power Module (IPM).
3. See the fuse and relay layout map molded into the inner surface of the IPM cover for rear blower motor relay identification and location.
4. Remove the rear blower motor relay from the IPM.

INSTALLATION
1. See the fuse and relay layout map molded into the inner surface of the Intelligent Power Module (IPM) cover for rear blower motor relay identification and location.
2. Position the rear blower motor relay to the proper receptacle in the IPM.
3. Align the rear blower motor relay terminals with the terminal cavities in the IPM relay receptacle.
4. Push down firmly on the rear blower motor relay until the terminals are fully seated in the terminal cavities in the IPM receptacle
5. Install and latch the cover onto the IPM
6. Reconnect the battery negative cable.