Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2003 >> RAM 2500 Truck 2WD V8-5.7L VIN D >> Repair and Diagnosis >> Power and Ground Distribution >> Power Interrupt Connector/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Interrupt Connector/Switch: Service and Repair

REMOVAL
The Ignition-Off Draw (IOD) fuse is disconnected from Integrated Power Module fuse cavity # 51 when the vehicle is shipped from the assembly plant. Dealer personnel must reconnect the IOD fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation.

1. Turn the ignition switch to the Off position.
2. Remove the Integrated Power Module cover.
3. Grasp the outer tabs of the IOD fuse holder unit in fuse cavity # 51 between the thumb and forefinger and pull the unit firmly upward.
4. Install the Integrated Power Module cover.

INSTALLATION
1. Turn the ignition switch to the Off position.
2. Remove the Integrated Power Module cover.
3. To install the IOD fuse, use a thumb to press the IOD fuse holder unit in fuse cavity # 51 firmly into the Integrated Power Module.
4. Install the Integrated Power Module cover.
pro multis · About Operation CHARM