Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2003 >> RAM 2500 Van V8-5.2L VIN Y >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

REMOVAL
1. Raise and support vehicle.
2. Disconnect speed sensor from the main harness.





3. Remove sensor mounting bolt from the steering knuckle.
4. Remove the sensor from the steering knuckle.

INSTALLATION

CAUTION: A special bolt is used to attach the sensor. Use only a factory replacement bolt.

1. Install the sensor into the steering knuckle.
2. Install mounting bolt and tighten to 15 Nm (11 ft. lbs.).
3. Connect sensor wire to main harness and ensure wire is routed away from hot or moving components.
4. Remove supports and lower vehicle.

pro multis · About Operation CHARM