Check Valve: Service and Repair

REMOVAL
1. Unlatch, open, and support the hood panel.

Wye Fitting And Check Valve Remove/install:

2. From the underside of the hood panel, disconnect the washer hoses from the three barbed nipples of the wye fitting/check valve unit.
3. Remove the wye fitting/check valve unit from the underside of the hood panel.

INSTALLATION
1. Position the wye fitting/check valve unit to the underside of the hood panel.
2. From the underside of the hood panel, reconnect the three washer hoses to the barbed nipples of the wye fitting/check valve unit.
3. Close and latch the hood.