Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2004 >> Neon L4-2.0L VIN C >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL
1. Disconnect battery negative cable.
2. Raise vehicle.

CAB Mounting:




3. Disconnect pump/motor connector from CAB .
4. Remove four screws securing CAB to HCU half of ICU. Remove CAB from HCU.
5. Pull outward on CAB connector lock and disconnect 24-way wiring connector. Remove CAB from vehicle.

INSTALLATION
1. Connect 24-way wiring connector to CAB and push in connector lock.
2. Align CAB with HCU half of ICU, then slide CAB up over HCU valves. Install four CAB mounting screws. Tighten mounting screws to 2 Nm (17 in. lbs.) torque.
3. Connect pump/motor connector.
4. Lower vehicle.
5. Connect battery negative cable.
6. Connect DRBIII(R) to vehicle to initialize system. Check and clear any faults.
pro multis · About Operation CHARM