Fog Lamp Unit Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.

Ignition Coil:

2. Remove nuts attaching fog lamp to fascia.
3. Disconnect wire connector from fog lamp.

Electronic Ignition Coil Connector:

4. Remove fog lamp unit from fascia.
5. Remove bulb from lamp unit.

INSTALLATION

CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

1. Place lamp unit into position .
2. Install fog lamp unit into fascia .
3. Connect wire connector to the fog lamp .
4. Install nuts attaching fog lamp unit to fascia.
5. Connect the battery negative cable.