RHD

REMOVAL
1. Disconnect the negative battery cable.

APPS Mounting:

2. Remove the 2 bracket mounting bolts.
3. Remove the 2 bolts holding module to the mounting bracket.

Electrical Connector Lock:

4. Unlock the electrical connector and then disconnect the electrical connector from the module.
5. Open the APPS module cover and disconnect the cable from the cam and module.
6. Remove assembly.

INSTALLATION
1. Open APPS module and connect cable.

AAPS And Cable RHD:

Electrical Connector:

2. Route electrical connector though mounting bracket.
3. Install electrical connector and lock .
4. Install the 2 top bolts .
5. Install the 2 mounting bolts.
6. Connect the negative battery cable.