Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2004 >> Neon L4-2.0L VIN F >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Battery Temperature Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Temperature Sensor: Service and Repair

REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable then the positive cable.
3. Disconnect the Battery Temperature Sensor electrical connector.
4. Carefully lift the thermal guard off over the battery.
5. Remove the thermal guard from vehicle.

Battery Temperature Sensor Connection:




6. Unsnap the Battery Temperature Sensor and remove the sensor.

INSTALLATION
1. Install the Battery Temperature Sensor to the thermal guard.
2. Carefully install the thermal guard over the battery.
3. Connect the Battery Temperature Sensor electrical connector.
4. Connect the battery positive cable then the negative cable.
5. Close hood.
pro multis · About Operation CHARM