Seat Temperature Control Module: Service and Repair

REMOVAL
1. Position the driver seat to the full rearward and inclined position.
2. Working under the driver front seat, remove the two heated seat module retaining screws. Due to the fact that the retaining screws are installed with the seat cushion pan removed, a small right angle screwdriver will be required to access and remove the screws.
3. Disconnect the seat wire harness connector from the connector receptacle on the back of the heated seat module. Depress the connector retaining tab and pull straight apart.
4. Remove the heated seat module from under the front seat.

INSTALLATION
1. Position the heated seat module under the front seat.
2. Connect the seat wire harness connector on the connector receptacle on the back of the heated seat module.
3. Working under the driver front seat, install the heated seat module retaining screws.
4. Re-position the driver seat.