Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2004 >> RAM SRT-10 Pickup V10-505 8.3L >> Repair and Diagnosis >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Front Control Module (FCM)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Control Module (FCM)

REMOVAL




1. Disconnect and isolate the battery negative cable (3).
2. Partially remove the Integrated Power Module (IPM) (4) from the engine compartment.
3. Remove the Front Control Module (FCM) retaining screws.
4. Using both hands, separate the FCM from the IPM assembly disengaging the 49-way electrical connector and remove the FCM from the vehicle.

INSTALLATION




1. Install the Front Control Module (FCM) onto the Integrated Power Module (IPM) (4) by pushing the 49-way electrical connector straight in.
2. Install the FCM retaining screws. Torque the screws to 7 in. lbs.
3. Install the IPM.
4. Connect the battery negative cable.
5. Verify normal vehicle operation.
pro multis · About Operation CHARM