Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2004 >> RAM SRT-10 Pickup V10-505 8.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Temperature Sensor ( Ambient / Intake ) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Temperature Sensor ( Ambient / Intake ): Service and Repair

REMOVAL

NOTE: Take care not to damage the thermistor pill when removing the sensor.




1. Remove the battery cover and disconnect the negative battery cable.
2. Disconnect the electrical connector from the inlet temperature sensor.
3. Remove sensor from inlet hose.

INSTALLATION

NOTE: Take care not to damage the open thermistor pill when installing the sensor.




1. Install sensor , use a little water to aid in insertion of sensor.
2. Make sure that the rib on the sensor matches up with the rib on the inlet hose. The thermistor pill should be in direct contact with the inlet air stream.
3. Connect the electrical connector.
4. Connect the negative battery cable and install battery cover.
pro multis · About Operation CHARM