Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2004 >> RAM SRT-10 Pickup V10-505 8.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Battery Temperature Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Temperature Sensor: Service and Repair

REMOVAL
The battery temperature sensor is located under the vehicle battery and is attached (snapped into) a mounting hole on battery tray.
1. Remove battery. Refer to Battery for procedures.


Battery Temperature Sensor Location:




2. Pry sensor straight up from battery tray mounting hole to gain access to electrical connector.
3. Disconnect sensor from engine wire harness electrical connector.

INSTALLATION
The battery temperature sensor is located under the vehicle battery and is attached (snapped into) a mounting hole on battery tray.
1. Pull electrical connector up through mounting hole in top of battery tray.
2. Connect sensor.
3. Snap sensor into battery tray.
4. Install battery. Refer to Battery for procedures.
pro multis · About Operation CHARM