Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2004 >> RAM SRT-10 Pickup V10-505 8.3L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL
1. Remove the negative battery cable from the battery.
2. Pull up on the CAB harness connector release and remove connector.
3. Remove the CAB mounting bolts.
4. Remove the pump connector from the CAB.
5. Remove the CAB from the HCU.

INSTALLATION

NOTE: If the CAB is being replaced with a new CAB is must be reprogrammed with the use of a DRB III.

1. Install CAB to the HCU.
2. Install the pump connector to the CAB.
3. Install mounting bolts. Tighten to 2 Nm (16 in. lbs.).
4. Install the wiring harness connector to the CAB and push down on the release to secure the connector.
5. Install negative battery cable to the battery.
pro multis · About Operation CHARM