Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2004 >> RAM SRT-10 Pickup V10-505 8.3L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Alternator: Service and Repair

REMOVAL




1. Disconnect the negative battery cable.
2. Remove air cleaner assembly, refer to the Engine/ air Intake System for more information.
3. Remove the accessory drive belt, refer to the Cooling section for more information.




4. Disconnect the field connector.




5. Disconnect the battery positive cable from the generator first disconnect the B+ cap on the wiring harness side.




6. Remove the upper mounting bolt (1).
7. Remove the lower mounting bolt and nut (2).




8. Remove generator.

INSTALLATION
1. Install generator.
2. Install lower mounting bolt and nut.
3. Install upper mounting bolt.
4. Tighten bolts to 55 N.m (41 ft. lbs).
5. Connect battery positive cable to generator, and install B+ stud cap.
6. Connect field connector.
7. Install accessory drive belt, refer to Cooling section for more information.
8. Install air cleaner assembly, refer to Engine/air Intake System for more information.
9. Connect negative battery cable, tighten nut to 14.2 N.m (125 in.lbs.).
pro multis · About Operation CHARM