Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Back Window Regulator: Service and Repair

BACKLITE VENT GLASS-REGULATOR

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove the rear seats.
3. Remove the rear cab back panel, Refer to Trim Panel.




4. Remove the two mounting bolts (1).
5. Disconnect the electrical connector to the power motor.




6. Separate the cable housings from the glass track (1).
7. Disconnect the cable ends from the vent glass (2).
8. Separate the support clips (5) and remove the regulator assembly (3).

INSTALLATION




1. Connect the cable ends to the vent glass (2).
2. Install the cable housings into the glass tracks (1).
3. Fasten the support clips (5).




4. Install the 2 mounting bolts (1).
5. Install the rear cab back panel.
6. Install the rear seats.
7. Connect the battery negative cable.