Engine Control Module: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.

Air Box Relocated:

2. Remove and relocate the air cleaner box, refer to the Engine/Air Intake/Air Cleaner Housing for more information.

Connectors Installed:

3. Unlock and disconnect the electrical connectors at the PCM.
4. Remove the wiring harness dip from the PCM bracket.

Wiring Harness:

5. Remove the mounting bolts from the bottom of the PCM bracket.
6. Remove the nut and bracket screws.

NOTE: For PL 2.4L SRT-4 remove PCM from bracket then remove both parts

7. Remove the assembly, PCM and bracket.