Ambient Temperature Sensor / Switch HVAC: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front license plate bracket.

Ambient Temperature Sensor:

3. Remove the ambient temperature sensor from the front fascia through the access hole in the fascia.
4. Disconnect the wire harness connector from the sensor and remove the sensor from the vehicle.

INSTALLATION
1. Connect the wire harness connector to the ambient temperature sensor.
2. Install the sensor onto the front fascia through the access hole in the fascia.
3. Install the front license plate bracket.
4. Reconnect the battery negative cable.