Camshaft Bearing Cap

Fig.25:

1. Bearing caps are identified for location (Fig. 25).

Fig.28:

2. Tighten M6 fasteners on Left camshaft bearing caps No. 2 - 5 to 12 Nm (105 in. lbs.) in sequence shown in (Fig. 28).
3. Tighten M6 fasteners on Right camshaft bearing caps No. 2 - 6 to 12 Nm (105 in. lbs.) in sequence shown in (Fig. 28).

Fig.29:

4. Apply Mopar Gasket Maker to camshaft bearing caps No. 1 and Left No. 6 (Fig. 29). Install bearing caps and tighten M8 fasteners to 28 Nm (250 in. lbs.).