Front Door Window Regulator: Service and Repair

REMOVAL




1. Remove the watershield.
2. Temporarily install the window switch and position the glass (1) to gain access to the regulator nuts (4).
3. Remove the nuts (4).
4. Secure the glass in the up position using a wood wedge or equivalent.




5. Remove the bolts (2) and loosen the remaining regulator bolts.




6. Separate the regulator (2) from the door panel (1) and disconnect the electrical connector (3).

INSTALLATION




1. Position the regulator (2) into the door (1) and connect the electrical connector (3).




2. Position the regulator bolts into the keyhole slots and slide into place.
3. Install the remaining regulator bolts (2).
4. Tighten the bolts to 9 N.m (80 in. lbs.).




5. Position the glass (1) onto the door regulator (3).
6. Install the nuts (4) and tighten to 9 N.m (80 in. lbs.).
7. Install the watershield.