Rear A/C Heater Control

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the air filter from the rear A/C evaporator housing.

Rear A/C Control Module:

3. Reach up into the rear A/C evaporator housing and disconnect the wire harness connector from the rear A/C control module.
4. Remove the two screws that secure the rear A/C control module to the rear A/C evaporator housing and remove the control module.

INSTALLATION
1. Position the rear A/C control module to the rear A/C evaporator housing.
2. Install the two screws that secure the rear A/C control module to the rear A/C evaporator housing. Tighten the screws to 2 N.m (17 in. lbs.).
3. Connect the wire harness connector to the rear A/C control module.
4. Install the rear air filter.
5. Reconnect the negative battery cable.