Grille: Service and Repair

GRILLE

REMOVAL




1. Remove the push pin fasteners and remove the upper radiator shroud.
2. Remove the upper bolts (1) and separate the four side clips.
3. From underneath, remove the push pins (3) and remove the grille.

INSTALLATION

CAUTION: Do not use a hammer or mallet to install the upper radiator shroud push pins, due to potential damage to the grille.




1. Install the grille (2) and seat the side clips fully.
2. From underneath install the push pin fasteners (3).
3. Install the upper bolts (1) and tighten to 13 N.m (10 ft.lbs.).
4. Install the upper radiator shroud and install the push pin fasteners.