Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2006 >> Durango 2WD V8-5.7L VIN 2 >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Temperature Switch: Service and Repair

HEATED SEAT SWITCH

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the center bezel (1) from the instrument panel.
3. Remove the heated seat switch bezel and both switches from the center bezel as a unit.




4. From the back of the heated seat switch bezel (2), gently pry the switch free and push the heated seat switch out through the rear of the bezel.

INSTALLATION

NOTE: When installing the heated seat switches, be certain they are installed in the proper mounting holes of the heated seat switch bezel (2). The heated seat switches are identified by a keyway in the connector receptacle on the back of each switch.




1. From the back of the heated seat switch bezel, gently push the heated seat switch in through the rear of the bezel.




2. Install the center bezel on the instrument panel.
3. Connect the battery negative cable.
4. Verify heated seat system operation.
pro multis · About Operation CHARM