Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> Caravan L4-2.4L VIN B >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning






POWER LIFTGATE LEARN CYCLE

Any time a power liftgate component is removed, replaced or a liftgate adjustment is performed a learn cycle must be performed. This learn cycle enables the power liftgate control module to learn or relearn information (travel limits, resistance to door travel, etc.) which allows it to perform properly and safely. Perform the following to complete a power liftgate learn cycle:

1. Obtain a diagnostic scan tool.

2. Connect the scan tool to the vehicle and check for any power liftgate system stored Diagnostic Trouble Codes (DTCs), correct and erase any stored DTCs.

3. Using the scan tool, Go into Test Routine Menu and select the power open command.

4. Select the power close command.

5. The liftgate learn cycle is complete.


If a diagnostic scan tool is not available, the learn cycle can be performed by actuating the liftgate using any of the normal command switches. Be certain to cycle the liftgate through a complete open and close cycle before returning the vehicle to service.


NOTE: If the power liftgate will not complete a full cycle a problem exists with the power liftgate system.
pro multis · About Operation CHARM