Installation

INSTALLATION
1. Place rail(s) into position (Figure 1).






Figure 1 OVERHEAD RAILS





2. Install ten attaching screws.

3. Snap rear end cover into position.

4. Snap front cover into position (Figure 2).






Figure 2 FRONT CONSOLE
5. Install four screws in the rail attaching DVD mounting bracket, if necessary (Figure 3).






Figure 3 DVD MOUNTING BRACKET
6. Press rail filler cover into position (Figure 4).






Figure 4 INSTALL RAIL FILLER COVER
7. Place DVD player into position and connect wire connector.

8. Install the four DVD player attaching nuts, and close DVD screen door (Figure 5).






Figure 5 RAIL CONSOLE DVD PLAYER





9. Place rear heater / A/C into position and connect wire connectors.

10. Snap rear heater / A/C control unit, by (Figure 6).






Figure 6 REAR CLIMATE CONTROL
11. Install storage compartments.

12. Connect battery negative cable.