Description - Front

DESCRIPTION

The infrared temperature sensor consists of two infrared transducers that are concealed behind a clear lens located near the top of the instrument panel center bezel (Figure 1). These sensors are used only on models equipped with the optional automatic temperature control (ATC) heating-A/C system. A molded plastic connector receptacle on the bottom of the panel outlet unit is concealed behind the center bezel. A short, dedicated jumper wire harness routed behind the center bezel connects the sensors directly to the ATC A/C-heater control module near the bottom of the center bezel. The infrared temperature sensor is integral to the center bezel panel outlet.






Figure 1 Infrared Temperature Sensor - RS shown, RG typical