Removal

2.4L
1. Release hood latch and open hood (Figure 1).

Figure 1 STARTER 2.4L
2. Disconnect and isolate the battery negative cable.

3. Disconnect solenoid wire connector from terminal (Figure 2).

Figure 2 BATTERY CABLE AND FIELD WIRE 2.4L
4. Remove nut holding B+ wire to terminal.

5. Disconnect solenoid and B+ wires from starter terminals.

6. Remove the lower bolt.

7. Remove the upper bolt and ground wire (Figure 3).

Figure 3 Upper Bolt and Ground Wire
8. Remove starter.