Removal

REMOVAL
1. Remove watershield. Refer to Front Door Panel.

2. Remove inner belt molding.

3. Position glass to gain access to front regulator lift plate (Figure 1)and rear regulator lift plate (Figure 2) through front and rear access holes in door panel.

4. Loosen two screws on regulator clamping glass (Figure 2).

5. Remove glass from regulator lift plates.

6. Disengage glass from glass run weatherstrip.

7. Insert front of glass between glass run channel and outer door panel.

8. Lift glass upward and out of exterior side of the opening at top of door (Figure 3).

9. Remove glass from vehicle.






Figure 1 FRONT GLASS LIFTPLATE





Figure 2 REAR GLASS CLIPS










Figure 3 FRONT DOOR GLASS