Removal - 3.3/3.8L

REMOVAL - 3.3/3.8L
1. Disconnect the negative battery cable.

2. Remove the electrical connector from the Inlet Air Temperature sensor.

3. Remove the air cleaner box lid. Remove hose from throttle body.

4. Disconnect the electrical connector at TPS.

5. Disconnect the electrical connector at IAC.

6. Remove the throttle and speed control cables from throttle body.

7. Remove 3 mounting bolts from throttle body.

8. Remove throttle body.

9. Disconnect the purge vacuum line from the throttle body.

10. Remove TPS from throttle body.